Upgrading To A Performance Cold Air Induction System – Is It Worth It?

Is it worth upgrading the stock cold air intake on your vehicle? It is a good question especially when most performance upgrades do not exactly come cheap.

Now, most auto specialists recommend such an upgrade especially if you are looking to improve engine power without compromising gas mileage. Why is this so?

Now performance cold air consumption packages from respectable distributors like “Prospeed Racing” do not yield any substantial gains in horsepower by itself. However, it is far from being an optional upgrade. To much better assess its effectiveness, it would be best to get a good understanding of how cold air intake systems work.

So how does it work?

Now you can consider a cold air induction upgrade as the launch point for all other performance upgrades that you want to do on your automobile. As the name currently recommends, such an upgrade would enable your engine to take in outside air more efficiently; an important milestone if you want your engine to produce more power.

Obviously, the said upgrade not only enhances the circulation of air into the engine cylinders, however, cools it also. The outcome is an engine that works and sounds better, however, uses up less fuel at the same time. It also looks great on your engine bay and among the most available upgrades that you can set up on your automobile.Naturally, what makes cold air intake systems such a vital upgrade is that it enhances oxygen levels needed for optimum fuel combustion. It attains this by directing cold air from strategic places around the lorry (preferably somewhere near the front bumpers or anywhere in the forward area of the vehicle).

Car enthusiasts go through all the difficulty merely because cold air is thicker than heated air and have the tendency to extend more when warmed up. The upgrade results in a more efficient and powerful combustion in the engine cylinders while consuming less fuel. How amazing is that?

So are cold air consumption worth it? Absolutely and no automobile lovers would forego such an upgrade. For such an easy and budget-friendly modification, you get a tonne of advantages and sets the speed for additional upgrades to make the most from your automobile’s efficiency.

Would you like to learn more? You would do well to check out other reputable sources on the web similar to http://www.prospeedracing.com.au/categories/intake-cold-air-intakes/ . They ought to be able to tell you more about getting the best performance out of your vehicle.

Give The Accessories A Glint of Chrome

A motorcycle is incomplete if it does not have gleaming chrome parts that glint in the sun or reflect a rainbow of colors at night. The lust for chrome is so great that most riders spend hours polishing their bikes to make the chrome glint and gleam. Some even install special chrome parts to give their bikes an added sparkle.

The popular chrome-plated accessories include: chrome cast wheels, backrest with chrome side plates, billet chrome license plate frame, chrome driving light bar, chrome luggage rack, saddlebags with chrome studs, chrome fender bumpers, chrome passenger floorboards and chrome headlamp and signal visors.

One should not forget the exhaust pipes and fenders. These are the first to catch the bikers’ fancy. They make sure that the exhaust pipes and fenders get an extra coating of chrome if they are not satisfied with what the manufacturer have given them.

A popular stop of young bikers is the chrome-plating shops, which use a three-part process to chrome plate motorcycle parts. The first step is soaking the parts in a copper bath. This is done to remove imperfections, and make the surface smooth. Then comes the nickel bath. The last step is the application of a chromium film. It is now the turn of polishers to take over. They patiently polish the surface till it starts gleaming.

The bikers love what they see, and take infinite care to keep the chromium –plated accessories the same away. They try to ensure that the parts don’t get scratched and the polishing is done regularly. The selection of polish is especially important. It is best to go for a branded product that has a sufficient amount of wax in it. Polishes that have extra grit damage the chromium film.

Also, a soft cloth should be used to polish the surface. This reduces the chances of scratching the surface inadvertently. A good practice is to remove the ring while polishing. Often, the ring comes in the way and leaves a scratch on the polished chrome surface.

The bikers should also be careful of using newly chromed exhausts. They should avoid driving long distances with a new exhaust, as this may turn the exhaust blue. The best practice is to run the bike over shorter distances initially so that the exhaust pipes get used to the heating and cooling process.

All bikers must remember that chrome plating will look good only if they take good care of it.

4 Ways to Increase Automotive Performance

In these days of high gasoline prices, it may seem ridiculous to consider ways to increase your car’s performance as they are almost always associated with increased fuel consumption. However, there are four ways to increase performance that do not have to negatively impact your gas mileage. Let’s take a closer look at each one.

1. Reusable Air Filters. Landfills are stuffed with items we use once and then throw out. Auto air filters are one such item and through the life of a car you can go through 6-12 of them with no problem. For approximately three times the price, washable and reusable air filters are a great alternative. When you purchase one it likely will be the last air filter your car will ever need. Reusable air filters enable you to gain slight increases in horsepower and acceleration as well as to impact the environment in a positive way.

2. Performance Chips. All new cars are operated by a computer chip that tells how much torque and horsepower can be displaced. Performance chips or recalibrations of your current chip can produce significant increases in horsepower and torque for your vehicle.

3. Performance Exhaust Systems. Cat-back or “catalyst-back exhaust systems” are a great way to free up trapped torque and to unleash horsepower. Keeping all the important emissions parts in place, a cat-back system incorporates large width exhaust pipes and low restriction performance mufflers into your car thereby lowering exhaust back pressure. A side benefit is the really awesome sound emitting from the exhaust system.

4. Cold Air Intake. A cold air intake is an under the hood mod that helps to reduce the temperature of the air entering the car for the sole purpose of increasing the power of the engine. Side benefits include enhancements to the appearance of the engine bay as this part can be attractive and colorful; the sound the unit makes is also appealing.

Costs for each of these performance enhancements can vary greatly. Shopping online with a trusted wholesaler is one of the best ways to find top quality parts at the lowest possible prices. By doing the work yourself, you can save a bundle and enjoy the fruits of your labor in no time.

Increase Your Torque and Save On Gas

If you were to mention to someone that most performance automotive parts can conserve fuel while producing more power, likely you would not be believed. In previous generations this statement would probably have held true, but today — due to technological advances — you can usually see an increase in power along with the added benefit of receiving a slight increase in fuel economy. This holds true for exhaust headers, the topic of this article.

Exhaust headers are one of the simplest add on accessories you can utilize to enhance your engine’s performance. Headers make it easier for the engine to drive exhaust gases out of the cylinders and to purge the manifold’s back pressure. Instead of a shared manifold that all of the cylinders use, each cylinder has its own exhaust pipe. The result? More power for your car and less fuel expended as the headers harness what was previously wasted power and turns it back into raw energy.

Selecting a header for your car basically comes down to two choices: stock headers and performance headers. With a stock header you come out ahead on price and with a performance header you win on power. Essentially, a performance header takes off where the stock header leaves off by providing an individual runner, or pipe, for each cylinder. In addition, exhaust backpressure is reduced, and air flows more easily out of your engine. Thus, you pay more for a performance header but you get what you really want: more power for your wheels.

So, who sells headers? Fortunately, the number of manufacturers producing excellent quality performance headers is on the rise. More competition means a better selection and lower prices. Some of the top manufacturers are:

Apexi Headers

BBK Headers

Borla Headers

DC Headers

Dynomax Headers

Edelbrock Headers

FlowTech Headers

Gibson Headers

Hedman Headers

JBA Headers

Pacesetter Headers

When it comes to purchasing headers, prices are all over the place. Shop around and compare price, service, and selection, between online wholesalers to uncover who is in the best position to deliver to you the highest quality parts for the lowest prices.